Porcelain Lever Handles

Porcelain Lever Handles

Check out this page if you are looking for Porcelain Lever Handles

Install/Repair Toilet Bowl

As the toilet bowl is one of the most used sanitary ware in the home, it is often necessary to repair it from time to time. Two common parts which require attention are: toilet tank & toilet bowl.

Toilet Bowl Repairs

When the seal at the base of the toilet bowl gets defective due to age, it starts leaking at its base. Before repairing, you must turn off the water supply to the toilet bowl and remove it only when the system is dry. After removing it, clean the old joint & pipe. Subsequently, fixed back the toilet bowl and seal it carefully and thoroughly. After all this, if there is still water leakage, most likely the porcelain of the toilet bowl has cracked. In this situation, you can't repair and have to replace the toilet bowl.

Toilet Tank Repair

One of the most common toilet tank problems is that water keeps running constantly. There may be a leak in the toilet tank. Test it by adding some food colouring into the water of the toilet tank and see if the coloured water gets into the toilet bowl. If it does, it means the toilet tank is leaking.

Before replacement of the parts, see if you can remedied by adjusting the length of the lever wire or the positioning of the toilet tank ball. However, if these steps don't help, you will need to replace the parts in the toilet tank.

Installing the New Toilet

Installing a new toilet bowl requires a bit more work. First, remove the old shut-off valve and use a Teflon tape to wrap around the pipe. Next, screw the new shut-off valve and install the wax ring or flexible ring after flipping the toilet bowl.

You will now need to set the toilet bowl in place, ensuring that it is fitted properly. After that, screw the bolt through the base to the floor. Avoid over tightening the screw as cracks may occur on the porcelain. Put a small amount of plumber's putty inside the bolt caps to seal properly. Remember to wrap Teflon tape around the shut-off valve.

With the help of bolts, nuts and washers, attached the toilet tank to the toilet bow and tighten the flexible connector to the toilet tank. Flapper and handle inside the toilet tank must be connected to the chain. Now, it's time to start the water supply and turn off the shut-off valve to let water inside the toilet bowl.

Most importantly, remember to check for any water leakages. With the right tools, time and patience, you can resolve your toilet bowl repair and installation problems. However, if you lack time and don't want the hassle, you can always engage a professional Singapore plumber for help!

About the Author

Bryan Ho is the partner of 24hr Family Plumber: Reliable Singapore plumber & plumbing services. Visit his website at www.24hrfamilyplumber.com.

Thanks for looking at our Porcelain Lever Handles information.

Faucets 7391, american, american standard porcelain lever handles, bathroom, faucet, home, porcelain lever handles, porcelain lever handles chrome, porcelain lever handles faucet